Guide + templates

How to respond to LinkedIn sales messages (and get fewer of them)

The best response to a LinkedIn sales message is one short, specific line: "not interested", "not before Q3" or "please send it here", because a clear answer ends an automated sequence and silence usually triggers three more follow-ups. To get fewer pitches, turn off InMail, limit who can send you invitations, browse in private mode, and give vendors one place to send offers.

Updated November 17, 2026 ยท 11 min read

Key takeaways

  • Most pitches you get on LinkedIn are steps in an automated sequence. A one-line reply stops the sequence; ignoring it usually does not.
  • Ten copy-ready replies below cover every common case: not interested, not now, wrong person, connection-then-pitch, "send it to our link", and more.
  • InMail and connection messages are different channels with different off switches. Settings stop InMail; only removing or blocking stops a connection.
  • A profile line such as "Vendors: send offers here" moves pitches out of your inbox without losing the useful ones.
  • Report scams and obvious automation. Block repeat offenders. Do not report a single polite pitch as spam.

The 30-second answer: pick a reply and send it

If a sales message is sitting in your inbox right now, use one of these. They are short on purpose: LinkedIn messages are read on phones, and a reply that needs no follow-up question is the one that ends the thread.

1. Not interested (final)

Hi NAME, thanks for reaching out. This is not something we need, so please take me off your follow-up list. Good luck with it.

2. Not now (with a real date)

Hi NAME, not a priority for us before MONTH. If you want to be considered then, send a one-paragraph summary with pricing and I will keep it on file. No need to follow up before then.

3. Wrong person (without handing over a colleague)

Hi NAME, I am not the right person for this, and I will not pass on a colleague's contact. If you want your offer seen by the team that buys this, please submit it here: LINK

4. Send your offer to our link

Hi NAME, we collect all vendor offers in one place so the right team sees them when a need comes up. Please add yours here (company, service and price, about two minutes): LINK I will not take calls about it, but it will be on file.

5. Connection-then-pitch

Hi NAME, I accepted your request to connect, not to start a sales conversation. Happy to stay connected. For offers, please use LINK and keep this thread for anything else.

6. Stop the sequence (after the third "just bumping this")

Hi NAME, this looks like an automated sequence. Please remove me from it. If I need this service I will find you.

7. We already have a provider

Hi NAME, we have a provider for this under contract until MONTH YEAR. If you want to be in the comparison at renewal, send your pricing here and it will be reviewed with the others: LINK

8. Interested, but no call yet

Hi NAME, this could be relevant. Before any call, please send: what exactly is included, a price or price range, and one client of similar size I could speak to. If it fits, I will suggest a time.

9. Agency offering candidates or freelancers

Hi NAME, we do not take speculative CVs or agency introductions without a signed agreement. If you would like to be considered as a supplier, send your terms and fee structure here: LINK

10. "Quick question" or "would love to pick your brain"

Hi NAME, if this is a sales conversation, I would rather see the offer in writing first: LINK If it is something else, tell me in one sentence and I will answer.
Replies 3, 4, 7 and 9 need a link. If your company does not have an intake page yet, a PitchBin link works: the seller fills in company, service and price, and the offer lands in a shared, searchable catalog instead of your DMs. For email pitches, see how to respond to a cold email and the longer templates for declining a sales pitch.

How to recognize a pitch-slap and an automated sequence

A "pitch-slap" is the sales message that arrives seconds or minutes after you accept a connection request. The request itself was often blank or flattering ("I came across your profile and would love to connect"), and the pitch was queued to fire on acceptance. You did not miss a relationship; there never was one.

Most of these messages are sent by outreach software that runs a fixed schedule: connection request, pitch on acceptance, follow-up after a few days, a "bump", then a "breakup" message ("should I close your file?"). Signs you are inside one:

  • Template seams: your company name in a different case or legal form ("Acme Inc."), a job title copied verbatim from your headline, or a sentence that would fit anyone in your industry.
  • Compliments with no detail: "impressed by what you are building at COMPANY" with nothing that proves they looked.
  • A meeting ask before any value: "15 minutes this Thursday or Friday?" in the first message.
  • Follow-ups that ignore your reply: if you answered and the next message pretends you did not, it is a machine. A clear reply usually stops well configured tools, because most of them pause a sequence when the contact responds.
  • Regular timing: follow-ups arriving at identical intervals, often outside the sender's working hours.
  • The breakup line: "I will assume this is not a priority" is the last step of a sequence, not a person losing patience.

LinkedIn's own User Agreement prohibits using bots or other unauthorized automated methods to send messages or connection requests. That is why reporting obvious automation is legitimate (see reporting below), and why automated senders tend to rotate accounts.

LinkedIn message types and the best response to each

Not every sales message deserves the same treatment. Use this table to decide in a few seconds.

Message type How to spot it Best response Reduce it with
Connection request with a pitch in the noteThe note already names a product or asks for a callIgnore or decline the request. No reply needed.Invitation settings
Pitch-slap (pitch right after you accept)Arrives minutes after acceptanceReply 5, or remove the connectionAccept only people you know or can place
Automated follow-up sequence"Bumping this", fixed intervals, breakup messageReply 6 once; report and block if it continuesA clear reply on message one
InMail sales pitchLabeled InMail, sender is not a connectionReply 1, 2 or 4Turn off InMail
Sponsored message or message adMarked as sponsored or as an adNo reply. Delete.Sponsored message and ad settings, if offered
Fake curiosity ("quick question", "pick your brain")No stated purpose, from a seller's profileReply 10Profile line for vendors
Agency offering candidates"I have a great engineer for you"Reply 9Profile line for vendors
Relevant, researched pitchNames a real problem you have, gives a priceReply 8, then file the offerNothing. These are worth keeping.
Scam or phishingLink to a login page, crypto, gift cards, urgent payment, too-good job offerDo not reply or click. Report and block.Reporting; check the sender (vendor checks)

InMail vs connection messages: why the difference matters

Sellers reach you through two doors, and each has its own lock.

  • InMail is a paid message to someone you are not connected to. Senders use credits from a Premium, Sales Navigator or Recruiter plan. InMail is the easiest door to close: one privacy setting turns it off. According to LinkedIn's help pages, senders get the credit back when the recipient responds within 90 days, so even a one-line decline is not wasted on them, and it tells their tool to stop.
  • Connection messages are free and unlimited once you are connected. No setting blocks messages from a first-degree connection. Your options are to reply, mute or archive the conversation, remove the connection, or block the person.
  • Open Profile is a Premium feature that lets any member message you without using InMail credits. If you have Premium, check whether Open Profile is on; it is a common reason Premium users get more pitches than they expect.
  • Sponsored messages are ads delivered to your inbox. They are not personal and never need a reply.

The practical consequence: the strongest filter is who you accept. A connection request from a stranger with a sales title is, more often than not, the first step of a sequence. Accepting it turns a closable InMail door into one you cannot close without removing them.

How to stop LinkedIn sales messages: the settings that help

LinkedIn moves its menus around, so the paths below are kept general. All of them start from your profile photo (Me) and Settings & Privacy. If a label on your account differs, search the settings page for the keyword in bold.

  1. Turn off InMail. Settings & Privacy > Data privacy > Who can reach you > Messages. Set the option that allows others to send you InMail to No. If your account shows an option for sponsored messages from partners in the same place, turn that off too.
  2. Limit connection invitations. Settings & Privacy > Data privacy > Who can reach you > Invitations to connect. Choose the narrower option (only people who know your email address or appear in your imported contacts). This removes the most common pitch-slap route.
  3. Browse in private mode. Settings & Privacy > Visibility > Profile viewing options. Many sellers message people who viewed their profile ("saw you checked out my page"). In private mode they do not see your name.
  4. Hide your email address. Settings & Privacy > Visibility > Who can see or download your email address. Set it to only you, and do not allow connections to download it. This keeps your LinkedIn connections from turning into email sequences.
  5. Review messaging preferences. Settings & Privacy > Data privacy > Messaging experience. Here you can manage options such as the focused inbox and read receipts. Turning off read receipts means senders cannot time their "I saw you read this" follow-up.
  6. Turn off Open Profile if you have Premium and do not want messages from non-connections.
  7. Trim your contact info. On your profile's contact info, remove a personal phone number and any address you would not hand to a seller.
What settings cannot do: they do not stop messages from people you are already connected to, and LinkedIn says members cannot opt out of certain service messages such as security notices. For existing connections, use replies, removal and blocking.

The profile line that redirects pitches

The single change with the biggest effect for most decision makers is telling sellers, on your profile, where offers go. Sellers read your profile before they write. Give them a better option than your DMs and many will take it, because a filed offer is more useful to them than an ignored message.

Put one line at the top of your About section, and the same link in your Featured section:

Vendors and agencies: please send offers here, not by DM: LINK Every offer is reviewed by the team that owns the budget.

Shorter variants for your headline or a Featured link title:

Vendor offers: LINK Selling to COMPANY? Start here: LINK No sales DMs, please. Offers go here: LINK

The line only works if the link leads somewhere real. A shared mailbox nobody reads is worse than nothing, because it trains sellers to come back through your inbox. A PitchBin link gives sellers a two-minute form (company, service, price) and gives your company a searchable catalog where marketing offers reach marketing and infrastructure offers reach engineering. If you also want a "Send us an offer" button on your website, that is covered in how to stop cold emails company-wide.

How to report sales spam on LinkedIn (and when to)

Reporting is for messages that break the rules, not for every pitch you did not want. A polite, relevant offer from a real person is not spam; a declined reply handles it. Report when you see:

  • Scams, phishing links, fake job offers, or requests for money, gift cards or crypto.
  • Fake or impersonated accounts (stock photo, no history, a name that does not match the company).
  • Obvious automation that ignored your reply or keeps returning from new accounts.
  • Harassment or messages that continue after a clear request to stop.

Steps

  1. Open the conversation and use the More (three dots) menu.
  2. Choose Report and pick the reason that fits (for example spam, scam or fake account).
  3. To stop all contact, open the sender's profile, use More and choose Report / Block, then Block. Blocking also removes the connection, and the person can no longer message you or see your profile.

If a message tried to take money or login details, report it outside LinkedIn as well. In the US, the Federal Trade Commission collects reports at ReportFraud.ftc.gov. Before replying to any seller who asks for payment or data, run the checks in our guide to verifying a vendor.

Common mistakes when replying to sales messages

  • Ignoring the first message. Silence keeps you in the sequence. One line on message one saves you four more.
  • "Maybe later" without a date. Vague interest is read as a buying signal and gets a calendar link. Give a month or say no.
  • Forwarding to a colleague. Passing a seller to a named teammate moves the problem. Point them to a shared intake link instead.
  • Agreeing to a call to be polite. Ask for scope and price in writing first (reply 8). Serious sellers will send it.
  • Deleting good offers. A priced offer from a credible vendor is market data. The day the budget appears, it saves a search. Keep it somewhere your team can find it, not in your personal inbox.
  • Accepting every connection request. Each stranger you accept is a free, unblockable channel into your inbox.

If you lead a team: one policy beats twenty inboxes

Founders, heads of marketing, IT leads and procurement get the most pitches, and each person improvising replies wastes time and loses the occasional useful offer. A simple policy works:

  1. One public link for all vendor offers, on the website, in the company page, and in each exposed employee's profile.
  2. One standard reply everyone can paste (reply 4 above).
  3. One owner per category who reviews new offers, so nobody has to read all of them.
  4. The same approach for email: forward cold emails to the shared catalog instead of answering each one. See Gmail and Outlook rules for sales emails.

Frequently asked questions

Should I respond to LinkedIn sales messages at all?

Yes, once, briefly. A one-line reply usually stops an automated sequence, while silence often triggers several follow-ups. If the message is a scam, do not reply; report and block instead.

How do I politely say no to a LinkedIn sales pitch?

Thank them, say it is not a need, and ask to be removed from follow-ups: "Thanks for reaching out. This is not something we need, so please take me off your follow-up list."

Can I stop all sales messages on LinkedIn?

Not completely. You can turn off InMail, limit who can send connection invitations, and browse privately, but no setting blocks messages from existing connections. For those, reply, remove the connection or block.

What is a pitch-slap on LinkedIn?

A sales pitch sent right after you accept a connection request, usually queued by outreach software. It signals the connection request was a sales step, not networking.

Is it OK to report a sales message as spam?

Report scams, fake accounts, obvious automation and messages that continue after you asked to stop. A single polite, relevant pitch from a real person is better handled with a short decline.

Does declining an InMail help the sender?

According to LinkedIn's help pages, senders get an InMail credit back when the recipient responds within 90 days, and a decline counts as a response. It also tells their tools to stop.

Where should vendors send offers instead of LinkedIn DMs?

To one shared intake link that your team reviews, such as a vendor offer form or a PitchBin link, placed in your About section, Featured section and replies.

Give sellers one link instead of your DMs.

Reply to LinkedIn pitches with your PitchBin link. Sellers file company, service and price in two minutes, and your team gets one searchable catalog. Free for buyers.

Create your PitchBin