Templates

How to politely decline a sales pitch (25 templates)

To politely decline a sales pitch, reply once, put the "no" in the first sentence, give one short reason that cannot be negotiated (no need, no budget, already covered), and say what happens next: nothing, a specific date, or a place to leave the offer. Below are 25 copy-ready replies for every stage, from the first cold email to a rejected proposal, plus LinkedIn and phone scripts.

Updated November 17, 2026 ยท 15 min read

Key takeaways

  • One clear reply ends most automated sequences; silence usually just moves you to the next scheduled follow-up.
  • Lead with the decision, not the thanks. "Thanks, but" makes the rep read the rest as a negotiation.
  • Give a reason the rep cannot fix. "Too expensive" invites a discount; "we are not buying this category" does not.
  • Never write "send me more info" or "circle back later" unless you mean it. Reps log both as interest.
  • If the offer might matter one day, keep it on file instead of keeping the conversation open.
  • A request to stop emailing is legally meaningful: in the US, CAN-SPAM opt-outs must be honored within 10 business days.
Want it written for you? Our free cold email reply generator builds the reply from your situation, channel and tone in a few clicks, with three wordings to choose from. It runs in your browser, with no AI and no signup.

The one template that works for most pitches

If you only need one reply, use this. It is short, final, and gives the rep a clean reason to close the deal in their CRM.

Subject: Re: [their subject] Hi [Name], We are not going to move forward with this. It is not something we plan to buy, so there is no need to follow up. Thanks for thinking of us, and good luck with the quarter. [Your name]

The rest of this page tunes that same structure for each situation: decision, reason, next step. Change the reason and the next step, keep the decision in sentence one.

The one-line rule for each situation

Most generic templates fail because they use the same soft wording for a first cold email and a lost deal after three calls. The rep has invested different amounts of time in each, so the reply needs a different weight.

SituationThe ruleTemplate
Cold email, first touchTwo sentences. No reason needed beyond "not a fit".1 to 3
After the 3rd follow-upName the sequence and ask for it to stop.4 to 5
After a discovery callThank them for the time, state what you learned that rules it out.6
After a demoSay the decision is made and who made it, so they do not try to go around you.7 to 8
After a proposal or quoteClose it in writing and say whether you will negotiate (usually: no).9 to 10
Not now, maybe in Q3Give a real date or say you will reach out. Never "keep in touch".11 to 12
Wrong personRedirect only with the colleague's consent, or point to one channel.13 to 14
Already have a vendorState the contract end date only if you want them back then.15 to 16
No budgetSay there is no budget for the category, not that the price is high.17 to 18
Never contact me againUse the words "remove" and "do not contact". Keep a copy.19 to 20
LinkedInShorter than email. One line beats a paragraph.21 to 22
Phone or voicemailInterrupt early, decline once, end the call.23
Keep on fileSave the offer, close the conversation.24 to 25

Declining a cold email (first touch)

The rep has spent seconds on you, probably as part of an automated sequence. You owe them nothing beyond a clear answer, and a clear answer is what stops the next five emails. If you have not decided whether to reply at all, our guide on how to respond to a cold email covers that decision.

1. The clean no

Hi [Name], Thanks, but this is not a fit for us and we will not be buying it. Please do not follow up on this one. [Your name]

2. Not a fit, with a reason they cannot argue with

Hi [Name], We do this in-house and have no plans to outsource it, so I will pass. No need to follow up. Best, [Your name]

3. Not a fit, but you know who might be

Only use this when you genuinely know a better target. It is the one reply reps remember warmly.

Hi [Name], Not for us: we are a [10-person / B2B / single-location] company and this is built for a different kind of buyer. Companies in [segment] would be a much better match. Good luck with it, [Your name]

Declining after the 3rd follow-up

By the third email you are inside a sequence: a scheduled series that keeps sending until you reply, book a meeting or reach the last step. Most sales engagement tools stop the sequence automatically when the prospect replies, which is why a one-line answer saves you more time than the delete key.

4. Stop the sequence

Hi [Name], I have seen your emails and the answer is no. Please take me out of this sequence, and there is no need for the "closing the loop" email either. Thanks, [Your name]

5. Reply to the "should I close your file?" breakup email

Breakup emails are written to get a reply. Give them the one they asked for.

Hi [Name], Yes, please close it. We are not looking for this now or in the foreseeable future. [Your name]

If the follow-ups keep coming from new addresses or new reps at the same company, filtering is faster than replying. See Gmail and Outlook rules for sales emails.

Declining after a discovery call

You gave the rep 20 or 30 minutes, so a two-line brush-off now feels rude. Name the specific thing you learned that rules the product out. That gives them a real reason to log, which is the most useful thing you can hand a salesperson.

6. After the first call

Subject: Our call on [date] Hi [Name], Thanks for the time on [day]. Having talked it through, we are not going to take this further. The main reason is [it needs a dedicated admin we do not have / it does not integrate with our billing system / our volume is too low to justify it]. I would rather tell you now than let it drift. Please do not book a follow-up. All the best, [Your name]

Declining after a demo

After a demo, the rep's instinct is to find another stakeholder who liked it. If the decision is final, say who made it, so the email does not read as your personal opinion that can be overruled by your manager.

7. The demo did not fit

Subject: Decision on [product] Hi [Name], Thanks for the demo and for tailoring it to our setup. We have reviewed it as a team and decided not to proceed. The workflow for [specific feature] does not match how we operate, and changing our process for it is not worth it for us. This is a team decision, so there is no need to reach out to others here. I appreciate the effort you put in. Best regards, [Your name]

8. We are staying with what we have

Hi [Name], Thanks again for the walkthrough. After comparing it with our current setup, we have decided the switching cost is not worth it this year, so we are staying put. I will reach out myself if that changes. Until then, please treat this as closed. [Your name]

Declining after a proposal or quote

A written proposal deserves a written no, and the sooner the better: the rep may be forecasting your deal to their manager. The key decision is whether you are open to a better offer. If you are not, say so, otherwise the reply comes back with a discount within the hour. If you ran a formal process with several bidders, use the longer letters in our vendor rejection letter templates instead.

9. We chose another vendor

Subject: Your proposal for [project] Hi [Name], Thank you for the proposal and the work behind it. We have chosen another provider for this project, and the decision is final. What tipped it: [their team had direct experience with our platform / their timeline fit our launch date]. I hope that is useful for your next bid. Kind regards, [Your name]

10. Over budget, and no, we do not want a discount

Hi [Name], Thanks for the quote. It is well above what we have set aside for this, and a smaller discount would not close the gap, so we will not be going ahead. Please do not rework the numbers on our account. Thanks for your time, [Your name]

"Not now, maybe in Q3"

This is the most abused reply in sales. "Maybe later" without a date becomes a monthly check-in that lasts a year. Either give a date you will honor, or keep the follow-up on your side.

11. Follow up on a specific date

Hi [Name], This could be relevant, but not before [Q3 / our budget review in September]. You are welcome to email me once in the first week of [month]. Until then, please pause any follow-ups. Thanks, [Your name]

12. Not now, and I will be the one to reach out

Hi [Name], The timing is not right for us, and I cannot predict when it will be. I have saved your details, and if this becomes a priority I will contact you. Please do not schedule check-ins in the meantime. Best, [Your name]

Wrong person: redirect without becoming the router

Reps love "I am not the right person, try Anna in IT", because it gives them a warm intro. Only name a colleague if that colleague agreed. Otherwise you have just signed Anna up for a sequence.

13. Redirect to a named colleague (with consent)

Hi [Name], I do not own this area. [Colleague] handles [category] and has said you can send one short email to [email]. Please take me off your list either way. [Your name]

14. Redirect to one channel (no names)

Hi [Name], I am not the right person, and I do not pass sales emails around internally. If you want this reviewed, submit the offer with scope and pricing through [your vendor intake link]. The relevant team checks it. Thanks, [Your name]

"We already have a vendor"

A rep's playbook treats "we already use X" as a competitive displacement opportunity, so the follow-up will ask what you would change about X. Close that door in the same email.

15. Happy with the current vendor

Hi [Name], We are covered here: we have a provider we are happy with and no plans to review it. There is nothing we would change, so a comparison call would not be a good use of your time. Best, [Your name]

16. Under contract, open later

Hi [Name], We are under contract for this until [month year]. We usually review options about [three] months before renewal, so [month] is the earliest it would make sense to talk. Please hold off until then. [Your name]

No budget

"It is too expensive" is a negotiation opener. "There is no budget for this category" is a closed door. Pick the second unless you actually want a lower price.

17. No budget for the category

Hi [Name], We have no budget for [category] this year, at any price, so I will pass. Our planning for next year happens in [month], and nothing changes before then. Thanks, [Your name]

18. Spending freeze

Hi [Name], We are under a freeze on new vendors and new subscriptions, and I cannot approve anything, including trials or pilots. Please close this out on your side. Best, [Your name]

Never contact me again (firm opt-out)

Politeness is optional here; clarity is not. Use the words "remove" and "do not contact", and keep a copy of what you sent. In the US, the FTC's CAN-SPAM compliance guide says commercial email senders, including business-to-business senders, must honor an opt-out within 10 business days. In the EU and UK, a named person has the right to object to direct marketing under Article 21 of the GDPR, after which the sender may no longer use their data for that purpose. This is a summary, not legal advice.

19. Remove me (polite but final)

Subject: Please remove me Hi [Name], Please remove [email] from all of your lists and sequences and do not contact me again by email, phone or LinkedIn. We will not be buying from [company]. Thank you, [Your name]

20. Second request, after they ignored the first

Subject: Second opt-out request Hi [Name], On [date] I asked to be removed from your mailing lists. I have received [number] emails since. Please remove [email] now and confirm in writing. I am also objecting to any further use of my personal data for direct marketing. If this continues, I will report it to [the FTC / the ICO / our data protection authority]. [Your name]

If the problem is company-wide rather than one persistent rep, the fixes are different: see how to stop cold emails across a company.

LinkedIn: decline in one line

LinkedIn messages read like chat, so a three-paragraph email-style reply looks odd. Keep it to one line. More scripts, including connection requests that turn into pitches, are in our guide to LinkedIn sales messages.

21. After a pitch in a DM or InMail

Thanks [Name], not something we need. I will pass, no need to follow up here.

22. The connection request was a pitch in disguise

Happy to stay connected, but I do not take sales conversations on LinkedIn. If you ever want something reviewed, send the offer to [intake link or email].

Phone and voicemail script

Cold callers are trained to keep you talking, and every question you answer extends the call. Interrupt in the first 20 seconds, decline once, and end it. You do not need to explain.

23. Live call, then voicemail reply

LIVE CALL "Sorry to cut in. I can tell this is a sales call, and we are not interested. Please put this number on your do-not-call list. Thanks, goodbye." If they push ("can I just ask one question?"): "No, thank you. I have answered. Goodbye." VOICEMAIL REPLY (by email, not a call back) Hi [Name], you left me a voicemail on [date] about [product]. We are not interested, so please do not call again. Thanks.

In the UK, businesses can register their numbers with the Corporate Telephone Preference Service, and the ICO enforces the rule against unsolicited marketing calls to registered numbers. In the US, the National Do Not Call Registry is aimed at personal numbers, and most business-to-business calls fall outside it, so asking the caller to add you to their internal do-not-call list is the practical step.

Keep on file: decline the conversation, keep the offer

Many pitches are a "no" today and a "who was that agency?" in eight months. The usual answer, "keep in touch", keeps the conversation alive, which is the opposite of what you want. Keep the offer instead. With PitchBin, you can forward the email to save@pitchbin.com, where it is filed as a structured entry with company, service and price in your company's shared catalog, and the vendor gets a polite note that the offer was saved. Or you can reply with your PitchBin link and let the seller fill in the details themselves.

24. Keep on file, by reply link

Hi [Name], We are not buying this now. If you want the offer on record for when we are, add your service and pricing here: [your PitchBin link]. It takes about two minutes, and it is where our team looks first when a need comes up. Please do not follow up by email. [Your name]

25. Keep on file, already saved

Hi [Name], Thanks. Not a fit right now, but I have saved your offer and pricing in our vendor catalog, where the team that owns this budget can find it. If it becomes relevant, they will contact you directly. No follow-ups needed. [Your name]
Before you keep an offer on file, spend 30 seconds checking the sender is a real company. Our checklist to verify a vendor covers the quick signs of a fake.

What the rep hears vs what you mean

Salespeople log every reply into a CRM, and most soft phrases map to a stage that keeps you in the pipeline. This is how common replies tend to be read on the other side.

You writeYou meanThe rep hearsWrite instead
"Not right now."No.Follow up in 30 to 90 days."We are not buying this, now or later."
"Send me more info."Go away politely.Engaged prospect. Send deck, then call."No need to send anything."
"Maybe next quarter."Probably never.Reminder set for day 1 of next quarter.A real date, or "I will reach out."
"It is a bit expensive."I do not want it.Price objection. Offer a discount."No budget for this category at any price."
"We are happy with our vendor."Stop.Find what they would change."There is nothing we would change, and no review planned."
"I will pass it on to the team."I will forget it.Found a champion. Ask who the team is.Template 14: one channel, no names.
"Let me think about it."I am too polite to say no.Close is near. Follow up Friday."We have decided not to go ahead."
"Not interested." (and nothing else)No.Reflex objection. Try once more.Add the reason and "no need to follow up".
(No reply)No.Did not see it. Next step in the sequence.Template 1 or 4.
"Please remove me."Stop.Stop. (This one works.)Keep it. Add "by email, phone or LinkedIn".

What not to write

  • Fake interest. "Sounds great, just not the right time" earns you a quarterly check-in forever. If it does not sound great, do not say it does.
  • "Send me more info." It is the most common polite exit and the worst one. It moves you up the pipeline and guarantees a call asking whether you read it.
  • A price complaint you do not mean. "Too expensive" is an objection a rep is paid to handle. Only say it if a lower price would change your answer.
  • A long explanation. Every extra sentence is a point to rebut. One reason is enough.
  • A colleague's name without asking. You are not declining, you are forwarding the sequence.
  • "Keep in touch." It means nothing to you and "permission to follow up" to them.
  • A lie that can expire. "We just signed with someone" invites "when does it renew?". Say only what stays true.
  • Sarcasm or a public call-out. The rep is often junior and following a script written by someone else. Firm is enough.

How polite should a decline be?

Match the effort the rep has put in. A mass cold email needs one sentence. A rep who ran a discovery call, built a custom demo and wrote a proposal deserves three or four sentences, a specific reason and a thank-you. Either way, the decision goes first. Thanking someone and then burying the "no" in paragraph two is what makes declines feel evasive, and it is what generates the follow-up asking whether you meant it.

Reply within a few days. A fast no is the most considerate thing you can give a salesperson: it lets them drop you from their forecast and spend the time on a buyer who will say yes.

Frequently asked questions

How do you politely say no to a salesperson by email?

Put the decision in the first sentence, give one reason they cannot fix (no need, no budget, already covered), and ask them not to follow up. For example: "We are not going to move forward. It is not something we plan to buy, so there is no need to follow up."

Is it rude to ignore a sales email instead of declining?

No. Senders expect most cold emails to go unanswered. But ignoring usually triggers more follow-ups, while a one-line decline ends most automated sequences. After a call, demo or proposal, a written reply is the professional choice.

What is the best "not interested" email reply?

"Thanks, but this is not a fit for us and we will not be buying it. Please do not follow up on this one." Add a short reason only if it is one the rep cannot argue with.

How do I tell a salesperson I am not interested after a demo?

Thank them for the demo, say the team has decided not to proceed, name the specific gap, and say it was a team decision so they do not contact other colleagues. Do it within a few days of the decision.

Should I give a reason when declining a sales pitch?

Give one reason, and choose one that is final. "We do this in-house" or "no budget for this category" closes the deal. "Too expensive" or "not right now" opens a negotiation.

What if the salesperson keeps emailing after I said no?

Send a written opt-out that uses the words "remove" and "do not contact", note the date, and filter their domain. In the US, CAN-SPAM requires commercial senders to honor opt-outs within 10 business days; in the EU and UK, a named person can object to direct marketing under GDPR Article 21.

How can I keep an offer for later without keeping the conversation going?

Save the offer, not the thread. Store the vendor, service and price in a shared vendor list or catalog, tell the rep it is on file, and ask them not to follow up. Your team can find it when the need appears.

Say no to the conversation, keep the offer.

Forward a pitch to save@pitchbin.com or reply with your PitchBin link. The offer lands in your shared catalog with its price, and the thread ends. Free for companies.

Create your PitchBin