Checklist

Vendor due diligence checklist, scaled to risk

Vendor due diligence is checking, before you sign, that a supplier is a real and legally registered business, is not sanctioned, can survive the length of the contract, and can be trusted with the money, data and access you will give it. How deep you go should depend on the vendor's risk: a low-risk vendor needs about 15 minutes of checks, a high-risk one needs security reports, a data processing agreement, financials and references.

Updated November 17, 2026 ยท 13 min read

Key takeaways

  • Tier every vendor first (low, medium, high), then run only the checks that tier requires. The highest risk trigger decides the tier.
  • Three checks apply to every vendor, even a $500 one: the company exists, it is not on a sanctions list, and its bank details are verified by phone.
  • Screen against the official lists: the US OFAC SDN list, the UK Sanctions List and the EU consolidated financial sanctions list. Screen owners and directors too, not just the company name.
  • For vendors that touch personal data, a signed data processing agreement and a subprocessor list are not optional in the EU and UK.
  • Download the checklist as a CSV that opens in Excel and Google Sheets, with a column per tier.
Download the checklist (CSV)

Step 1: put the vendor in a risk tier

Most vendor due diligence checklists online are written for banks and large enterprises, and they apply the same 200-question review to everyone. A small company that does that either stops buying or, more often, quietly skips the checklist. Tiering fixes both problems: you spend effort where the risk is.

Answer the five questions below. The vendor's tier is the highest tier any single answer points to.

QuestionLowMediumHigh
What data will they see?None, or public dataInternal business data, staff contact detailsCustomer personal data, financial, health or other sensitive data
What access will they have?NoneLimited accounts, office visitsAdmin access, production systems, your bank or payment flows
If they fail tomorrow?Replace them within a week, little impactPainful for weeks, but you keep operatingYou cannot serve customers or meet a legal duty
Annual spend (adjust to your size)Under $5,000$5,000 to $50,000Over $50,000, or a multi-year commitment
Do they act for you with third parties?NoWith your customers or partnersWith government officials (permits, customs, licenses), or in high-risk countries

Examples: a caterer for one office event is low. A recruitment agency that receives candidate CVs is medium (personal data, but limited). A payroll provider, a cloud host, an outsourced IT administrator or a customs broker is high. The spend thresholds are a starting point; a 10-person company might set "high" at $20,000.

Step 2: run the checks for that tier

This is the whole checklist on one screen. "Required" means do not sign without it. "If relevant" means only when the tier question that triggered it applies (for example, data protection checks only when the vendor handles personal data).

CheckLow riskMedium riskHigh risk
Legal existence and registryRequiredRequiredRequired
Sanctions screening (company name)RequiredRequiredRequired
Bank details verified by phoneRequiredRequiredRequired
Ownership and directors, screenedSkipRequiredRequired
Financial healthSkipBasic (filed accounts or credit report)Full (two years of accounts, credit report)
Insurance certificatesIf on siteRequiredRequired, limits checked
ReferencesSkip1 to 22 to 3, called
Information securitySkipShort questionnaireSOC 2 Type II or ISO 27001, plus questionnaire
Data protection (DPA, subprocessors)If relevantIf relevantRequired
Business continuity and exitSkipAskRequired, with written exit plan
Anti-briberySkipContract clauseClause plus questions; full review if they deal with officials
ESG and supply chainSkipIf relevantIf relevant
Re-reviewOn renewal or changeEvery 2 yearsEvery year

For a low-risk vendor, the three required checks are the same ones in our quick guide to verifying a vendor. Everything below is what you add as the tier goes up.

2. Ownership and sanctions screening

Sanctions screening is a legal obligation, not a best practice. US persons may not deal with blocked parties, and the US Treasury's Office of Foreign Assets Control (OFAC) can impose civil penalties even when the company did not know (strict liability). The UK and EU impose similar asset-freeze rules on their persons and companies.

Which lists to screen

  • US: the OFAC Specially Designated Nationals and Blocked Persons List (SDN list), searchable free in the OFAC Sanctions List Search, which also covers OFAC's non-SDN lists.
  • UK: the UK Sanctions List published by the UK government.
  • EU: the EU consolidated list of persons, groups and entities subject to EU financial sanctions, maintained by the European Commission.
  • Screen the lists that match where you are, where the vendor is, and the currency you pay in. A UK company paying a vendor in US dollars should screen at least the UK and US lists.

Screen the owners, not just the company

A clean company name proves little. Under OFAC's 50 Percent Rule, an entity owned 50 percent or more, directly or indirectly, in aggregate, by one or more blocked persons is itself treated as blocked, even if it is not named on the list. The UK and EU apply ownership and control tests of their own.

  • Ask the vendor to name its owners above 25 percent and its directors (medium and high tiers). In the UK, compare the answer with the persons with significant control shown on Companies House.
  • Screen each name, and record the date, the lists checked and the result. A screenshot or exported result is enough evidence.
  • A name match is not automatically a hit. Compare date of birth, nationality and address before you decide, and escalate a true match to a lawyer before any payment.
  • Re-screen at renewal and whenever ownership changes. Lists change weekly.

3. Financial health and payment safety

  • Medium tier: one of filed accounts (free on Companies House for UK companies), a business credit report, or the vendor's latest year-end figures.
  • High tier: two years of accounts or audited statements, a credit report, and a direct question: "Is any single customer more than 30 percent of your revenue?" A vendor that loses its biggest client mid-contract can disappear with it.
  • Check for county court judgments, liens or insolvency notices where your country publishes them.
  • Bank details, every tier: confirm the account details by calling a phone number you found independently (the website or the register, not the email or invoice). Repeat this every time the vendor "changes banks". Fake bank-change emails are one of the most common forms of business email compromise.
  • Red flags: requests for large upfront payments, payment to a personal account or a country unrelated to the vendor, pressure to pay before paperwork is done.

4. Insurance

Ask for certificates of insurance, not a sentence saying they are insured. Check the insured name matches the legal entity, the dates cover your contract, and the limits make sense for the work.

  • General or public liability: any vendor working on your premises.
  • Professional liability (errors and omissions, or professional indemnity): consultants, agencies, software and advisory work.
  • Cyber liability: vendors holding your data or with system access.
  • Workers' compensation or employer's liability: where required by law for their staff on your site.
  • For high-risk vendors, ask to be named as additional insured where that is standard in your market, and diary the expiry date.

5. References

Logos on a website are not references. Ask for two or three customers of similar size and scope, then call them. Five questions get most of the value:

  1. What did they deliver for you, and over how long?
  2. Did the people who sold it also do the work?
  3. What went wrong, and how did they handle it?
  4. Did the final cost match the quote?
  5. Would you hire them again for the same work?

Hesitation on question 5 tells you more than the rest of the call. For a structured way to score what you hear, use our vendor evaluation criteria and scorecard.

6. Information security

High tier: ask for a SOC 2 report or ISO 27001 certificate

  • SOC 2 is an independent auditor's report under the AICPA's framework. A Type II report tests whether controls actually worked over a period (commonly 6 to 12 months); a Type I only describes them at one point in time. Prefer Type II.
  • When you read a SOC 2 report, check four things: the scope covers the service you are buying, the period ended within the last 12 months (or a bridge letter covers the gap), the list of exceptions the auditor found, and the "complementary user entity controls", which are the things you must do for the controls to work.
  • ISO/IEC 27001 is a certification of the vendor's information security management system. Check the certificate's scope covers your service, the expiry date (certificates run three years with yearly surveillance audits), and that the issuing body is accredited.
  • No report? For a small vendor that is normal. Use the questionnaire below and weigh the answers.

Medium tier: a 10-question security questionnaire

1. Do all staff accounts with access to our data use multi-factor authentication? 2. Is our data encrypted in transit and at rest? Where is it stored (country, provider)? 3. Who on your side can access our data, and how is access removed when people leave? 4. Do you have a written incident response process? How fast will you notify us of a breach affecting our data? 5. Have you had a security incident in the last 24 months? What happened and what changed? 6. How do you patch systems and software, and how quickly for critical vulnerabilities? 7. Do you back up our data, how often, and when did you last test a restore? 8. Which third parties (subprocessors) can access our data? 9. Do you run security awareness training for staff? 10. Do you hold SOC 2, ISO 27001 or a similar independent assessment? If not, has anyone tested your security (for example a penetration test) in the last year?

Questions 1, 4 and 8 are the ones to insist on. A vendor that cannot say who can see your data or how fast it will tell you about a breach is not ready for medium-risk work.

7. Data protection: DPA and subprocessors

If the vendor processes personal data on your behalf and you are subject to the GDPR or UK GDPR, Article 28 of the GDPR requires a written contract with the processor (usually called a data processing agreement or DPA) and requires the processor to give "sufficient guarantees" that it protects the data.

  • Get a signed DPA covering what data, for what purpose, how long, security measures, breach notification, deletion or return at the end, and your right to audit.
  • Get the list of subprocessors. Under Article 28, a processor may not engage another processor without your prior written authorization, and must inform you of changes so you can object.
  • If data leaves the UK or EEA, ask which transfer mechanism applies (for example Standard Contractual Clauses, the UK International Data Transfer Agreement or Addendum, or an adequacy decision).
  • Outside Europe, check your local law: many US state privacy laws and other national laws also require contracts with service providers.
  • This is general information, not legal advice. Your national data protection authority (the ICO in the UK) publishes guidance on processor contracts.

8. Business continuity and exit

  • Ask how long it would take them to restore service after a major outage (recovery time objective) and how much data could be lost (recovery point objective). Compare that with what you can tolerate.
  • Ask about key people: if one person does all the work, what happens when that person leaves?
  • Agree the exit before you sign: how you get your data back, in what format, within how many days, and at what cost.
  • For truly critical vendors, know your fallback: a second supplier, a manual process, or a notice period long enough to switch.

9. Anti-bribery and corruption

Under section 7 of the UK Bribery Act 2010, a company can be liable for failing to prevent bribery by people performing services on its behalf, including agents and contractors, with "adequate procedures" as the defense. The US Foreign Corrupt Practices Act covers bribes to foreign officials paid through third parties. That is why the risk sits mostly with vendors who deal with officials for you.

  • Medium tier: an anti-bribery clause in the contract.
  • High tier: ask whether the vendor, its owners or staff are public officials or related to one, how it is paid, and whether it uses sub-agents.
  • Red flags: success fees far above market, requests for cash or payment to a third country, a vendor recommended by the official who will grant your permit, vague invoices ("consulting services").

10. ESG and supply chain, where relevant

Only add these when your industry, your customers or the law requires them.

  • Modern slavery and labor: UK organizations with turnover of 36 million pounds or more must publish a modern slavery statement under the Modern Slavery Act 2015, and many pass questions down to their suppliers. Ask for the vendor's statement or policy if you manufacture, source goods or use labor-intensive services.
  • Large-customer requirements: if you sell to large EU companies, they may ask you about your own suppliers because of their supply chain due diligence duties. Keeping this checklist filled in is your evidence.
  • Environmental: certifications or emissions data only where a customer contract or tender asks for them.

How to run it: the process in six steps

  1. Tier the vendor with the five questions above, before you request anything.
  2. Send one request with everything that tier needs (documents, questionnaire, references), so the vendor answers once, not in five rounds.
  3. Review and record each check in the CSV: status, date, who checked, evidence link.
  4. Decide: approve, approve with conditions (for example "only after the DPA is signed"), or reject. Write down the reason.
  5. Onboard: add the vendor to your approved vendor list and run your vendor onboarding checklist (contract, payment setup, access).
  6. Re-review on schedule: high yearly, medium every two years, low on renewal. Also re-review on any trigger: ownership change, security incident, bank-detail change, scope increase.
Due diligence starts before the vendor is even a candidate. When unsolicited offers are filed in one shared place, with the sender's website checked on arrival, you are not starting from zero when one of them becomes a real option. That is what forwarding cold emails to save@pitchbin.com does: each one becomes a structured entry with company, service and price, and senders with no real website are flagged.

Download the vendor due diligence checklist (CSV)

The file is a CSV that opens in Excel and Google Sheets. Each row is one check, with columns for what each tier needs, the evidence to collect, red flags, and blank columns for status, date, reviewer and notes. Make one copy per vendor, or add a vendor column and keep all reviews in one sheet.

Download the checklist (CSV)

Common mistakes

  • One checklist for every vendor. It either blocks small purchases or gets ignored. Tier first.
  • Screening only the company name. Owners and directors are where sanctions exposure hides.
  • Accepting "we are SOC 2 compliant". There is no SOC 2 certificate; there is a report. Ask for it and read the scope and exceptions.
  • Checking once, never again. A vendor approved three years ago may have new owners, new subprocessors and an expired insurance policy.
  • Doing the checks after signing. Your leverage to get a DPA or an exit clause disappears the moment the contract is signed.
  • Keeping the evidence in one person's inbox. If that person leaves, you cannot prove the checks happened.

Frequently asked questions

What is vendor due diligence?

The checks you run before signing with a supplier to confirm it is a real, legally registered business, is not sanctioned, is financially stable and can be trusted with your money, data and access. The depth should match the vendor's risk.

Is vendor due diligence the same as third-party due diligence?

Mostly. Third-party due diligence is the broader term and also covers agents, distributors, resellers and partners. Supplier due diligence and vendor due diligence are used for the companies you buy from.

What is the minimum check for a small vendor?

Confirm the company exists in the official business register, screen its name against the sanctions lists that apply to you, and verify its bank details by calling a phone number you found independently.

Which sanctions lists should a small company check?

At minimum the lists of the country you operate in and the currency you pay in. In practice that usually means the US OFAC SDN list, the UK Sanctions List and the EU consolidated financial sanctions list.

How often should vendor due diligence be repeated?

A common schedule is every year for high-risk vendors, every two years for medium, and at renewal for low. Re-check immediately after an ownership change, a security incident or a change of bank details.

What if a vendor has no SOC 2 report or ISO 27001 certificate?

That is normal for small vendors. Use a short security questionnaire instead, insist on clear answers about multi-factor authentication, breach notification and subprocessors, and limit what data and access you give them.

Start due diligence before the vendor is a candidate.

Forward offers to save@pitchbin.com: each becomes a filed entry with company, service and price, and senders with no real website are flagged. Free for buyers.

Create your PitchBin