Guide + template
How to compare vendor quotes (with a free comparison template)
To compare vendor quotes, first restate every quote on the same scope, unit, term and currency, then add the costs each one leaves out (setup fees, overage, minimum terms, auto-renewal increases, travel, per-seat licenses) and compare the total cost over 12 and 36 months. Only after that, score the shortlist on a few weighted non-price criteria and send written questions to fill any gaps before you decide.
Updated November 17, 2026 ยท 12 min read
Download the quote comparison sheet (CSV) Opens in Excel and Google Sheets. Totals and scores are pre-built formulas.
Key takeaways
- A headline price is not comparable until scope, quantity, term, currency and tax treatment match. Write that basis down before you open the quotes.
- Most of the difference between quotes hides in one-off fees, minimum terms, renewal increases, overage and pass-through costs. Ask for them in writing.
- Compare total cost of ownership over 12 months and over 36 months. The ranking often flips between the two.
- Hourly quotes carry estimate risk. Calculate the break-even hours at which they stop being the cheapest option.
- Set the weights for non-price criteria before you see prices, or you will tune them to the vendor you already like.
The method in seven steps
- Fix the comparison basis. One paragraph: what you are buying, how many units, at what service level, for how long, starting when. Every quote is restated against this, not the other way round.
- Screen out non-compliant quotes. A quote that misses a mandatory requirement (a certification, a deadline, data residency) does not get compared on price. Park it or ask the vendor to requote.
- Normalize units, term, currency and tax so every number answers the same question.
- Add the hidden costs from the checklist below, line by line, for each vendor.
- Calculate total cost of ownership over 12 and 36 months, plus the cost of exiting early.
- Score non-price criteria with weights you set in step 1.
- Send gap questions to every vendor in the same words, update the sheet, then decide and record why.
If you are still deciding whether to ask for quotes, proposals or general information, start with RFI vs RFP vs RFQ. This guide assumes the quotes are already in your inbox.
Step 1 to 3: make the quotes comparable
Vendors format quotes to look good, not to be compared. One quotes per month, another per project, a third per hour; one includes tax, one quotes in euros, one bundles a setup fee into month one. Before any arithmetic, restate each quote on the same seven dimensions.
| Dimension | What goes wrong | How to normalize |
|---|---|---|
| Scope | Vendor A includes strategy and reporting, Vendor B only delivery. | List deliverables as rows. Price any missing item, either from the vendor's own rate card or the cheapest other quote for it. |
| Units | Per user, per seat, per article, per hour, per site. | Pick one unit that matches what you consume (articles, users, tickets) and convert everything into cost per unit. |
| Term | Monthly vs annual prepaid vs multi-year discount. | Compare over the same horizon (12 and 36 months) and note the minimum commitment separately. |
| Currency | One quote in EUR, one in USD. | Convert at one rate on one date and write the date in the sheet. If you will pay in a foreign currency, note the exchange risk as a criterion. |
| Tax | Some quotes include sales tax or VAT, others do not. | Compare all quotes exclusive of tax, then check separately whether tax applies to each (cross-border services are often treated differently). |
| One-off vs recurring | A big setup fee makes month one look expensive and the monthly look cheap. | Keep one-off and recurring lines separate, then combine them only inside the 12 and 36-month totals. |
| Payment timing | 50 percent upfront vs Net 30 in arrears. | Record payment terms. Upfront payment is a cash-flow cost and a risk if the vendor underdelivers. |
Step 5: total cost of ownership over 12 and 36 months
Total cost of ownership (TCO) is everything you will pay for the same outcome over a fixed horizon. For services, a workable formula is:
Use two horizons. Twelve months shows the commitment you are signing. Thirty-six months shows what the relationship really costs once setup fees are amortized and renewal increases kick in. Then add a third number: the cost of exiting early, because a quote you cannot leave is worth less than one you can.
Large public buyers work the same way. The EU public procurement directive lets contracting authorities award on the "most economically advantageous tender" and use life-cycle costing rather than price alone (Directive 2014/24/EU, Articles 67 and 68), and the US Federal Acquisition Regulation describes how contracting officers analyze proposed prices and costs (FAR 15.404-1). You do not need their paperwork, but the principle is the same: compare what you will actually pay over the life of the contract.
Worked example: three quotes for the same content program
A company wants eight blog articles a month for at least a year, with monthly reporting. Three fictional vendors reply with three different pricing models. These are the numbers that are pre-filled in the downloadable sheet.
What the quotes say
- Vendor A, monthly retainer: $4,000 per month for 8 articles. Fine print: $2,500 onboarding fee, reporting dashboard at $150 per month, 12-month minimum term, auto-renews for 12 months unless cancelled 60 days before the end, renewal price plus 5 percent.
- Vendor B, project fee: $22,000 per six-month project of 48 articles. Fine print: a $3,500 discovery workshop is required at the start of each project, one on-site visit per project with travel billed at cost (they estimate $1,200), 50 percent payable upfront.
- Vendor C, hourly: $95 per hour, "about 5 hours per article". Fine print: project management billed at 10 percent of hours, an SEO tool seat passed through at $120 per month, 30 days notice, no minimum term.
On headline price per article, B looks cheapest ($22,000 / 48 = $458.33), then C (5 hours x $95 = $475), then A ($4,000 / 8 = $500). Now add everything.
The 12-month arithmetic
- A: $2,500 + ($4,000 x 12) + ($150 x 12) = $2,500 + $48,000 + $1,800 = $52,300.
- B: two projects x ($22,000 + $3,500 + $1,200) = 2 x $26,700 = $53,400.
- C: 96 articles x 5 hours = 480 hours, plus 10 percent management = 528 hours x $95 = $50,160, plus $120 x 12 = $1,440, total $51,600.
The 36-month arithmetic
- A: year 1 $52,300; year 2 retainer $4,200 x 12 = $50,400; year 3 $4,410 x 12 = $52,920; dashboard $1,800 x 2 = $3,600. Total $159,220.
- B: six projects x $26,700 = $160,200 (assuming the project price holds, which you should ask).
- C: three years x $51,600 = $154,800 (assuming the hourly rate holds, which you should also ask).
| A: retainer | B: project fee | C: hourly, 5 h/article | C: hourly, 6 h/article | |
|---|---|---|---|---|
| Headline per article | $500.00 | $458.33 | $475.00 | $570.00 |
| 12-month TCO | $52,300 | $53,400 | $51,600 | $61,632 |
| Real cost per article (12 months) | $544.79 | $556.25 | $537.50 | $642.00 |
| 36-month TCO | $159,220 | $160,200 | $154,800 | $184,896 |
| Still owed if you stop at month 6 | $24,900 | $0 (project ends) | $0 (30 days notice) | $0 |
What the example teaches
- The cheapest headline was the most expensive fixed quote. B's repeated workshop and travel turned $458 into $556 per article.
- The hourly quote wins only if the estimate holds. If articles take 6 hours instead of 5 (a 20 percent overrun), C's 12-month cost jumps to $61,632: 576 hours plus 10 percent is 633.6 hours x $95 = $60,192, plus $1,440 in licenses. That is about 18 percent more than A.
- Calculate the break-even. C beats A over 12 months only while ($52,300 - $1,440) / $95 / 1.1 / 96 articles, roughly 5.1 hours per article, is not exceeded. Ask C for actual hours from similar past work, or for a not-to-exceed cap.
- Exit cost is a real number. A is competitive on price but locks in $24,900 if the program fails at month 6. B and C let you walk away.
- All three are within about 3.5 percent on the 12-month view ($51,600 to $53,400). When price is that close, the decision belongs to quality and terms, which is the next step.
To sanity-check whether a quote sits in the normal range for its category at all, see what agencies and B2B vendors charge in 2026.
Step 6: weighted scoring when price is not everything
A weighted score turns "I like B's samples better" into a number you can defend. Keep it short: four to six criteria, weights that add up to 100 percent, each vendor scored 1 to 5 by at least two people independently.
- Choose criteria and weights before opening the quotes. Write them in the sheet and do not change them afterwards.
- Turn price into a score with a formula, not a gut feeling: price score = 5 x lowest TCO / this vendor's TCO. The cheapest gets 5, the others proportionally less.
- Score each other criterion 1 to 5 against a short written description of what a 5 and a 1 look like.
- Multiply each score by its weight and add them up.
| Criterion | Weight | A | B | C |
|---|---|---|---|---|
| Price (12-month TCO) | 35% | 4.93 | 4.83 | 5.00 |
| Quality of samples | 25% | 4 | 5 | 3 |
| Flexibility and exit terms | 15% | 2 | 4 | 5 |
| Relevant experience | 15% | 5 | 3 | 3 |
| Reporting and communication | 10% | 4 | 3 | 3 |
| Weighted score | 100% | 4.18 | 4.29 | 4.00 |
B wins narrowly on quality and flexibility, despite being the most expensive on the 12-month view. A gap of 0.11 is small enough to treat as a near tie: the sensible next move is to ask A to drop the onboarding fee or shorten the minimum term, and ask B to drop the second workshop, then rescore. For a fuller list of criteria and a scorecard you can reuse, see vendor evaluation criteria.
Typical weightings by purchase type
| Purchase | Price weight | What else carries weight |
|---|---|---|
| Commodity (office supplies, standard hardware) | 50 to 70% | Delivery time, payment terms |
| Creative and marketing services | 25 to 40% | Sample quality, relevant experience, team continuity |
| Software and IT services with data access | 20 to 35% | Security, support levels, exit and data portability |
| Professional advice (legal, tax, audit) | 15 to 30% | Specialist expertise, conflicts, insurance |
These are starting points from common practice, not rules. Adjust them to how much a bad choice would cost you.
Step 7: questions to send back to vendors
Every gap in your sheet is a question. Send the same questions to every vendor, in writing, with the same deadline, so the answers are comparable and nobody gets an unfair second look at a competitor's price. Copy, delete what does not apply, and send:
Once you have chosen, tell the others clearly and quickly. A short, specific note keeps the door open for the next purchase; these vendor rejection letter templates cover the common cases.
How to use the quote comparison template
The CSV opens in Excel and Google Sheets with the worked example above pre-filled, so you can see every formula working before you overwrite it. It has one column per vendor and four blocks of rows:
- Basis (rows 2 to 12): vendor, quote date, validity, currency, pricing model, units per month, minimum term, notice, auto-renewal, renewal increase, payment terms.
- Costs (rows 13 to 19): one-off fees, recurring monthly fees, project fees, hours per month, hourly rate, travel, other extras. Put zero rather than leaving a cell blank, so you can see you checked.
- Totals (rows 20 to 25): 12-month total, units, real cost per unit, years 2 and 3 estimate, 36-month total and the cost of exiting at month 6. Rows 20, 21, 22 and 24 are formulas.
- Scoring (rows 27 to 33): weights in column B, scores per vendor, a check that weights add up to 1 and the weighted total. The price score is calculated from row 20.
The last column holds the question to ask when a cell cannot be filled from the quote. To add a fourth vendor, insert a column before the notes column and copy the formulas across. If the file opens as a single column (common with some European regional settings), import it through Excel's Data menu (From Text/CSV) and choose comma as the delimiter.
Common mistakes when comparing quotes
- Comparing monthly to annual. A $4,000 monthly retainer and a $22,000 project mean nothing next to each other until they share a horizon.
- Reading the quote but not the terms. Auto-renewal, minimum term and price increases almost always live in the terms and conditions or the master agreement.
- Treating an estimate as a price. "About 5 hours" is a forecast. Model the overrun or get a cap.
- Letting one vendor redefine the scope. If one vendor's smart suggestion changes what you need, update the basis and ask everyone to requote, or you are comparing different things.
- Losing the original quote. When a renewal invoice arrives a year later at a different price, the PDF that "someone has in their inbox" is the only evidence of what was agreed.
- Only collecting quotes when the need is urgent. Under deadline pressure you take the first acceptable answer. The steps of a calmer process are in the vendor selection process.
Keep every quote on record
A comparison is only as good as the quotes behind it, and quotes tend to live in personal inboxes, chat threads and PDF attachments nobody can find at renewal time. Whatever tool you use, store each quote with its date, validity and full terms, next to the other offers for the same category.
If the quotes you are comparing come from vendors you already work with, your vendor list is the place to record the winner, its contract end date and its notice deadline.
Frequently asked questions
How many quotes should I get before choosing a vendor?
Three is the common practice for a meaningful purchase, and many company purchasing policies require it above a spending threshold. Fewer gives you no sense of the market; many more usually costs more time than it saves.
How do I compare quotes with different pricing models?
Convert each one into the same unit (cost per article, per user, per ticket) over the same horizon. Add one-off fees, extras and renewal increases, then compare 12-month and 36-month totals and the cost of exiting early.
What is a quote comparison template?
A spreadsheet with one column per vendor and rows for the basis (scope, term, currency), each cost component, the totals and a weighted score. A good one also has a column for the question to ask when a quote leaves a cell empty.
Should I always pick the cheapest quote?
No. Pick the best value against criteria you weighted before seeing prices. When totals are within a few percent, quality, flexibility and exit terms should decide, and the gap is a reason to negotiate.
What is the difference between a quote and an estimate?
A quote is a price the vendor commits to for a defined scope, usually for a stated period. An estimate is a forecast that can change. Treat hourly or "approximately" figures as estimates and ask for a cap.
Is it fair to tell a vendor what a competitor quoted?
Sharing a competitor's exact quote is generally poor practice and may breach confidentiality terms. Asking every vendor the same clarification questions and inviting a best and final offer from all of them is fair.
Keep reading
Keep every quote, with the price you were shown.
Forward vendor offers to save@pitchbin.com. Each one is filed by category as an unchangeable snapshot, side by side with the others. Free for companies receiving offers.